Reverse Engineering

Introducing the New FARO Cobalt 3D Imager

Smart 3D imager arrays – A new class of automated metrology sensor provides sophisticated in-process measurement, minimizing integration and infrastructure costs

FARO Technologies, Inc. announces highly-adaptable 3D imager arrays that promise to drive automated industrial manufacturing metrology processes to the next level.  The FARO Cobalt 3D Imager is equipped with dedicated on-board processors – an industry […]

By |January 14th, 2016|3D Documentation, 3D Imager, 3D Measurement, 3D Software, CAM2, Inspection, Manufacturing, Quality Control, Reverse Engineering|Comments Off on Introducing the New FARO Cobalt 3D Imager

Corvette Racing Uses 3D Measurement to Maximize Manufacturing Efficiencies in Preparation for 24 Hours of Le Mans Race

FARO congratulates Pratt & Miller Engineering and Corvette Racing on their in class win at the 24 Hours of Le Mans Race, the world’s oldest active endurance sports car race that took place on June 13th -14th in Le Mans, France. […]

By |June 19th, 2015|3D Measurement|Comments Off on Corvette Racing Uses 3D Measurement to Maximize Manufacturing Efficiencies in Preparation for 24 Hours of Le Mans Race

How Metrology Software Facilitates Reverse Engineering

The process of reverse engineering was at one time an arduous task for product development; however, thanks to 3D measurement technology by FARO, the process is becoming more efficient and cost-effective than ever before. A 55-minute webinar, “Using Metrology Software to Capture Data for Reverse Engineering,” addresses the growing influence in the technology field, uses […]

By |May 14th, 2015|3D Measurement|Comments Off on How Metrology Software Facilitates Reverse Engineering

Next Generation 3D Laser Scanning

How Blue Lasers, Rapid Capture Rates, and Advanced Optical Performance is Revolutionizing 3D Measurement
The easiest, fastest, and most affordable way to measure parts and products is with a lightweight Portable Coordinate Measuring Machine (CMM) that offers both contact and non-contact measurement. […]

By |March 5th, 2015|3D Measurement|Comments

3D Manufacturing Technologies Seminar Recap

Additive manufacturing has increasingly become a topic of interest in the manufacturing sector and for good reason. Implementing 3D scanning and 3D printing provides several alternative solutions that cannot be as easily accomplished using conventional methods. The full 3D scan to 3D print workflow and the benefits of incorporating 3D technology were further explored during the “3D Manufacturing Technologies Seminar” hosted by Modern Tech in Orlando, FL on Thursday, February 12. […]

By |February 20th, 2015|3D Measurement|Comments

FARO Releases New FARO Edge ScanArm HD

FARO announced today the release of the all-new FARO® Laser Line Probe HD. The power of the new high-definition 3D scanner combined with the flexibility of the  FARO Edge measuring arm  creates the world’s most affordable, high performance contact/non-contact portable measurement system on the market – the FARO Edge ScanArm HD.

[…]

By |September 3rd, 2014|3D Measurement|Comments

Reverse Engineering Violins

So what do you do when you have about 20 violins from the 1730’s show up in town? Attempt to find out why these particular instruments sound so much better than others of course. Over the years and currently, many are still trying to find that answer as to why some sound so much better than others when the apparent construction is virtually the same.

[…]

By |June 21st, 2014|3D Measurement|Comments

FARO Technologies Supports Reverse Engineering Vehicles to Upgrade Armoring

In the today’s world, individuals have more access and available opportunity to high-powered weapons. Military personnel, dignitaries, politicians, power brokers and celebrities are all susceptible to potential damage inflicted. Ground, naval, and air flight modes of transport are all potential targets. As such, the need to more heavily armor existing passenger vehicles (both commercial and military) has greatly increased. In a similar vein, recent availability of advanced materials encourage the opportunity to replace legacy armored plates with lighter weight, stronger replacement armor.

[…]

By |June 10th, 2014|3D Measurement|Comments

FARO Launches Complete Metrology Software with FARO® CAM2® Measure 10.3

FARO Technologies announced the release of FARO® CAM2® Measure 10.3, its newest software for the FaroArm®, FARO® ScanArm and FARO® Laser Tracker.CAM2 Measure 10.3 offers a complete contact and non-contact metrology solution. The new capabilities and enhanced functionality provide customers the value of having a single partner, with an integrated software and hardware solution, that is supported by a worldwide service network.

[…]

By |April 30th, 2014|3D Measurement|Comments